Table of Contents
Advertisement
Call Functions
Making Calls
1.
Pick up the handset or press
2.
Listen for dial tone.
3.
Dial the phone number. The dialed number will be displayed. The name will also be displayed if
it is stored in the phone book.
Correcting Dialing Errors
•
To erase one digit, press
•
To erase all digits, press and hold down
Redialing the Last Telephone Number Dialed
1.
Pick up the handset or press
2.
Press
Receiving Calls
When there is an incoming call, the SX6P rings, an incoming call notification displays the call type
and Caller ID information (if available).
To answer an incoming call:
•
Pick up the handset and begin talking.
– or –
Press
[Speaker] (listening only).
Receiving a Call When Caller ID Is Activated
The Caller ID feature displays the caller's number when the SX6P rings. If the caller's name and
number are stored together in the SX6P phone book, the caller's name and number will be
displayed. Contact your service provider to activate this feature.
If there are missed calls (calls not answered), MISSED CALLS will be displayed with the number of
Note:
calls missed. See the Call History section of this manual on page 12 for more information.
Ending Calls
•
To end a call, hang up the phone by placing the handset back onto the SX6P cradle.
– or –
Press the speaker key again to end the call (if the phone is in listening only mode).
In-Call Functions
Muting a Call
1.
During a call, press
LCD screen.
2.
Press
[Mute] again to un-mute the microphone.
Using Call Waiting
•
To answer an incoming call while you're on another call, press
again to switch between calls. Contact your service provider regarding the availability of the call
waiting feature.
Phonecell
SX6P CDMA
®
[Clear] once.
[Redial].
[Mute]. A notification will display in the upper right corner of the
[Speaker] (listening only). The SX6P is now "off-hook."
[Clear] until all digits are erased.
[Speaker] (listening only). The SX6P is now "off-hook."
8
[Flash]. Press
[Flash]
User Manual
Advertisement
Table of Contents
