Connecting The Handset; Wall Mounting - Telular PHONECELL SX6P-200C CDMA User Manual

Connecting the Handset

Before you use can use the SX6P, you must connect the handset cable.
1.
Connect the handset cable to the phone jack - see Figure 7 .
2.
Connect the handset cable to the handset - see Figure 7 .
Figure 7 – SX6P handset connection.

Wall Mounting

1.
Remove the mounting clip from the cradle and re-insert it with the tab pointing up - see Figures
8 and 9 .
Mounting Clip in
Cradle (tab up)
Figure 8 – Handset mounting clip assembly.
2.
Mark two hole locations 83 mm (3-1/4 inches) vertically apart and drill two holes into the wall.
Phonecell SX6P CDMA
®
Phone jack
Handset cable
Remove
Mounting Clip
from the Cradle
(tab down)
Figure 9 – Handset mounting clip for wall-mount.
3
Handset
Insert
Mounting
Clip into
the Cradle
(tab up)
User Manual