Voicemail Access; Reading Text (Sms) Messages - Telular PHONECELL SX6P-200C CDMA User Manual

Placing a Call on Hold
1.
During a call, press
LCD display.)
2.
To reactivate the call, press
3-Way Calling
Contact your service provider regarding the availability of 3-way calling.
To perform a 3-way call:
1.
Place the first call and wait until it connects.
2.
After the first call is connected, dial the second number.
3.
Press [Flash]. This connects the second call and puts the first call on hold.
4.
Wait for the second call to connect.
5.
After you are connected to the second call, press
and completes the 3-way call.
Adjusting the Handset or Speaker Volume
•
During a call, press the up/down arrows to raise (
Reminder:

Voicemail Access

Contact your service provider regarding the availability of voicemail.
1.
Press
2.
Select 1: Voice Mail .
3.
To listen to your voicemail, select 1: Listen .
4.
If you have deleted all your messages and the message indicator does not go away after an
hour, press 2: Clr Msg Ind .

Reading Text (SMS) Messages

When you receive a new text message, the envelope icon will appear on the display. To access
messages:
1.
Press
2.
Select 2: Read Msgs .
3.
Use the up/down arrows (
4.
Once you have read the message, you can do the following:
1: Delete
2: Forward
3: Reply
[Flash]: Call: dials the callback number in the message (if available)
Phonecell SX6P CDMA
®
[Hold]. (A notification will display in the upper right corner of the
The Speaker is a "listen-only" feature; you must use the handset to speak with your callers.
[Message].
[Message].
/
[Hold] again.
) or lower (
) to select the desired message. Press
9
[Flash], which then connects the first call
) the handset/speaker volume.
[Store] to read it.
User Manual