Table of Contents
Advertisement
Sending a Text Message
1.
Press
2.
Select 3: Create Message .
3.
Select 1: New Message or 2: Sent Messages .
4.
Select 1: From Phonebook or 2: Enter Number .
(If you select From Phonebook , your phone book entries will be displayed alphabetically.
Select an entry and press
(If you select Enter Number , use your keypad to enter a number and press
5.
Type the message using the keypad. Press
message.
To erase one character, press
# and down arrow (
* and up arrow (
MSG key: switch between uppercase, lowercase, and special characters.
6.
Enter the callback number that you want included with the message and press
If you do not want a callback number, press
7.
Select the message priority as Normal or Urgent , then press
8.
Select Send & Save , then press
save a copy to the Sent Messages folder.
– or –
Select Send , then press
saving a copy.
Deleting All Text Messages
1.
Press
2.
Select 4: Delete Msgs .
3.
Use the up and down arrows to select whether you would like to delete all messages, then
press
Individual messages can be deleted from the Read Msgs option.
Note:
Using Message Lock
Message Lock adds password protection to the voicemail/SMS menu. If the message lock is active
and you press
your lock code; the default is 0000).
1.
Press
2.
Select 5: Message Option .
3.
Select 1: Message Lock .
4.
Select the desired option using the up/down arrows and press
Activating Message Alert
Message Alert turns on and off the message alert tone. When off, the envelope icon will still be
displayed on the LCD but there is no alert tone.
1.
Press
2.
Select 5: Message Option .
3.
Select 2: Message Alert .
4.
Select the desired option using the up/down arrows and press
Phonecell
SX6P CDMA
®
[Message].
[Store] to initiate a message to that number.)
): move forward one character.
): move backward one character.
[Store] if you want to send the message immediately without
[Message].
[Store].
[Message] from the idle screen, the unit will prompt you for a password (which is
[Message].
[Message].
[Store] when you are finished writing the
[Clear] once; to erase the entire screen, press and hold
[Store].
[Store] if you want to send the message immediately and
10
to continue.)
[Store].
[Store].
[Store] to save.
[Store] to save.
User Manual
.
Advertisement
Table of Contents
