Battery Operation; Location And Setup; Connect The Handset - Telular SX6P User Manual

Battery Operation

The SX6P will recharge its battery pack when connected to AC power. If AC power is interrupted,
the SX6P will continue to operate, using power from the battery.

Location and Setup

The SX6P comes with a standard spike antenna (TNC).
1. Attach and finger-tighten the antenna - see Figure 5. Do not over-tighten the antenna.
2. Select a location that is above ground and as close to windows (or exterior walls) as possible
to get the best signal - see Figure 6.
Figure 5 - Attach the antenna.

Connect the Handset

Before you can use the SX6P, you must connect the handset cable.
1. Connect the handset cable to the phone jack - see Figure 7.
2. Connect the handset cable to the handset - see Figure 7.
Phone jack
Handset cable
Figure 7 – SX6P handset connection.
Phonecell SX6P CDMA
®
Figure 6 - SX6P location.
Handset
2 User Manual