Before Use; After Use; Inspection And Repairs - Black+Decker CLM5448PC Original Instructions Manual

Hide thumbs Also See for CLM5448PC:
Table of Contents

Advertisement

ENGLISH
Use in a dry location only. Do not allow
u
the appliance to become wet.
Do not immerse the appliance in water.
u
Do not open body casing.
u
There are no user serviceable parts
inside.
Do not operate the appliance in
u
explosive atmospheres, such as in the
presence of flammable liquids, gases
or dust.
To reduce the risk of damage to plugs
u
and cords never pull the cable to
remove the plug from a socket.
Before using, always visually inspect
u
to see that the blades, blade bolts
and cutter assembly are not worn or
damaged.
Replace worn or damaged blades and
bolts in sets to preserve balance.
In order to avoid a hazard due to
u
inadvertent resetting of the thermal
cut-out, this appliance must not be
supplied through an external switching
device, such as a timer, or connected
to a circuit that is regularly switched on
and off by the utility.
Never operate the machine while
u
people, especially children, or pets are
nearby.
Keep in mind that the operator or user
u
is responsible for accidents or hazards
occurring to other people or their
property.

Before use

While operating the machine always
u
wear substantial footwear and long
trousers. Do not operate the machine
when barefoot or wearing open
sandals. Avoid wearing clothing that is
loose fitting or that has hanging cords
or ties.
8
(Original instructions)
Thoroughly inspect the area where the
u
machine is to be used and remove all
objects which can be thrown by the
machine.
Before using, always visually inspect
u
to see that the blade, blade bolt and
the blade assembly are not worn or
damaged. Replace worn or damaged
components in sets to preserve
balance. Replace damaged or
unreadable labels.

After use

When not in use, the appliance should
u
be stored in a dry, well ventilated place
out of the reach of children.
Children should not have access to
u
stored appliances.
When the appliance is stored or
u
transported in a vehicle it should be
placed in the boot or restrained to
prevent movement following sudden
changes in speed or direction.

Inspection and repairs

Before use, check the appliance for
u
damaged or defective parts. Check for
breakage of parts, damage to switches
and any other conditions that may
affect its operation.
Do not use the appliance if any part is
u
damaged or defective.
Have any damaged or defective parts
u
repaired or replaced by an authorised
repair agent.
Never attempt to remove or replace
u
any parts other than those specified in
this manual.
Be careful during adjustment of the
u
mower to prevent entrapment of the
fingers between moving blades/parts
and fixed parts of the machine.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clm5448pcb

Table of Contents