NEUTRIK Speakon SPX Series Assembly Instruction

ASSEMBLY INSTRUCTION
NL4FX / NL4FRX
Speakon SPX Series Lockable Loudspeaker Connector
A
B
C
D
E
®
25 mm [1.0"]
12 mm [0.5"]
1-
2+

Assembly of the Connector:

A
Place bushing and chuck over cable.
B
Prepare cable as shown.
Important is the stripping length of 25 mm and
12 mm.
Insert wires into terminals and secure clamp
C
terminals with screw driver (Pozidrive ).
D For easy wiring especially on big cables, first
screw on the inner conntacts 1+ and 2+ and
afterwards the outer contacts 1- and 2- !
E
Push chuck up to housing .
Important: Align the chuck by positioning
the nose into the recess.
1+
F
Tighten the bushing
INFO to the screw driver:
2-
Pozidrive # 1
- 1 -
®
DO NOT USE!
Philips