Nice BIO Series Manual page 22

MEMORY CARD
The receivers are supplied already equipped with a BM250 memory card that can contain the codes of 252
remote controls. If necessary, up to 4 other memories can be fitted in the specific connectors making a total
of 1008 codes. It is fundamental to fit the
memories in the established order, starting
Fig. 3
from no.1 through to no.4. In fact, the recei-
ver enters and seeks the codes starting
from the first memory and then, if neces-
4
a
sary, goes on to the second, and so on. If a
3 a
1 a 2 a
memory is not completely full or is missing,
the subsequent memories are not even
taken into consideration.
N.B.: The receiver must be disconnected
from the power supply while adding and
removing memory cards.
REGULATIONS AND SETTINGS
Selcting the relays on the channels
Each receiver is able to recognize a 4 transmitter channels even contemporaneously. Channel association to the
relay is stable and is given by the position of the relay itself. Various types of relay modules which differentiate from
the type of function performed can be fitted in the specific connectors. In normal operation the output relay function
- 22-