Follett Tempo UCD100A30-NF Operation And Service Manual page 13

Cleaning
This ice machine has an automatic clean alert function.
The control will indicate
clean your unit. When
cleaning may be necessary. Cleaning removes lime scale, other mineral deposits, and sanitizes the machine. Poor
ice quality and reduced ice output are signs that cleaning is necessary. If the machine consistently requires more
frequent cleaning, consult a plumber to test the water quality and recommend appropriate treatment.
Under normal conditions, cleaning should be done when the display shows
at any time by pressing and holding the clean button for 10 seconds.
will appear in the display indicating the start of the cleaning process.
01
You may override CL in the display without cleaning by pressing and holding the
seconds. will scroll in the display and the cleaning reminder (
ICE
month cycle. Failure to clean may reduce the quality and quantity of ice produced. Once the clean cycle begins,
it can be canceled by pressing
automatically cancel if user fails to activate control at steps 7, 12, and 20 within 2 hours.
Required for cleaning:
§ Hose and funnel – provided with unit
§ Bucket and cleaning sponge
§ Clean potable water
§ SafeCLEAN Plus™ Cleaner
§ Water filter
Cleaning Process (approximate time: 40 minutes)
WARNING!
§ For protection, rubber gloves and safety goggles (and/or face shield) should be worn when handling
SafeCLEAN Plus™.
§ Do not use bleach, it will damage the dispenser.
1. Press and hold
2.
01 will appear in the display
3. Remove access shield
4. Remove all ice in bin
5. Remove any ice protruding from the ice dispenser tube
6. Insert the end of the cleaning tube (Fig. 12) into the ice dispenser;
slowly pour in approximately 1 quart of hot potable water (100 F
minimum). This will melt ice inside the dispenser tube. It is normal
for some water to flow out of the ice dispenser tube and exit from
the vent tube while pouring. Omit this step if no ice is in the ice
dispenser tube.
CL in the display, approximately every six months with normal use, reminding you to
is displayed, ice production will continue. Depending on water conditions, more frequent
CL
three times. Press
for 5 to 10 seconds.
. You may initiate a cleaning cycle
CL
+
) will be reset for another approximate six
CL
once more to start making ice. The clean cycle will
Fig. 12
Tempo Undercounter Ice Machine Bin
–
, , and buttons for 10
Cleaning Tube
Vent Tube
and Funnel
Ice
Dispenser
Tube
13