Siemens SIMATIC NET IE/WSN-PA Link Compact Operating Instructions page 35

2.2.3 Accessories for the device variant with connector for external antenna
Optional accessories
Note
Minimum attenuation of 4 dB required
When using the ANT792-6MN antenna (antenna gain 6 dBi), the antenna cable must have an attenuation of at least 4 dB.
This is the case with the antenna cable 6XV1 875-5AN10 (length 10 m).
When using the antenna cable 6XV1 875-5AN10 (length 1 m), an additional attenuator with at least 4 dB must be inserted in
the cable.
The following accessories for the device variant 6GK1 411-6CA40-0BA0 are not supplied with the IE/WSN-PA Link:
● External antenna ANT792-6MN
Order no. 6GK5 792-6MN00-0AA6
● Lightning protector LP798-1N
Order no. 6GK5 798-2LP00-2AA6
● Antenna cable (10 m) N-Connect Male/Male Flexible Connection Cable
Order no. 6XV1 875-5AN10
● Antenna cable (1 m) N-Connect Male/Male Flexible Connection Cable
Order no. 6XV1 875-5AH10
● 2.4 GHz coupling piece IWLAN RCoax N-Connect Male/Male Coupler
Order no. 6GK5 798-0CP00-1AA0
3 Installation and connecting up
3.1 Important notes on using the device
Safety notices on the use of the devices
The following safety notices must be adhered to when setting up and operating the device and during all work relating to it
such as installation, connecting up, replacing devices or opening the device.
General notices
WARNING
Opening the device
Do not open when energized.
General notices regarding use in hazardous areas
WARNING
Risk of explosion when connecting or disconnecting the device
DO NOT CONNECT OR DISCONNECT EQUIPMENT WHEN A FLAMMABLE OR COMBUSTIBLE ATMOSPHERE IS
PRESENT.
WARNING
Risk of explosion when replacing components
SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS I, DIVISION 2 OR ZONE 2.
IE/WSN-PA Link
A5E02509264-AE, 01/2015
35