Advertisement
GAS TAPS
Periodic lubrication of the gas taps must be carried out by specialist personnel only. In the
event of operating faults in the gas taps, call the Service Department.
GENERAL ADVICE
●
When the appliance is not being used; it is advisable to keep the gas tap closed.
●
If the gas tap becomes stiff, it is necessary to dismount it accurately, clean it with gasoline
and spread a bit of special grease resistant to high temperatures on it. This operation must
be executed by a qualified technician.
TRIPLE RING BURNER
The triple ring burner must be correctly positioned (seen fig.3); the burner rib must be entering
in their ligament as shown by the arrow. The burner correctly positioned must not rotate (fig.4).
Then position the burner cap A(center) and theburner cap B(outer) (fig.4).
CLEANING THE TRIPLE RING BURNER
Pay special attention to this burner: the four holes around the outside of the crown must
always be kept clean. When cleaning ,remove the flame divider (fig.4) and use a cotton bud,
toothbrush or some other item to clean out any incrustations or dirt from the four holes marked
"H" (fig.6). This procedure is necessary to ensure the burner functions correctly.
4
Hide quick links:
Advertisement
