Charging The Device - Silvercrest SAT 1500 A1 Quick Start Manual

6.1.

Charging the device

 Remove the sensor unit from the armband,
by pulling it firmly if necessary (see Fig-
ure C).
 Connect the activity tracker to a free USB
port on your PC or laptop (see Figure B).
 Make sure the USB port contacts on the ac-
tivity tracker match the contacts on the USB
port on your PC or laptop.
The device needs approximately 90 minutes to
charge.
PLEASE NOTE!
If the charging control LED does not light up red,
this means the activity tracker is not connected
to the USB port, and cannot be charged.
Turn the sensor unit over and check the operat-
ing state of your PC/laptop.
 Use a USB extension cable to make it easier
to charge the activity tracker.
The operating LED goes out as soon as the sen-
sor unit has been fully charged.
22 - English