Charging The Battery - Silvercrest SAT90A1 Quick Start Manual

˜ Charging the battery
B
1 . Hold the housing
2 . Pull the housing
3 . Connect the revealed USB plug
4 . When the battery is fully charged: Disconnect the USB plug
5 . Connect the USB plug
NOTES:
Make sure that the contacts of the USB plug
in the USB port . If the product does not charge, turn the USB plug 180° and plug it
into the USB port again .
The product turns on automatically as soon as it is connected with the USB port .
The product cannot be operated during charging .
The charging status is shown in the display
A charging cycle with a charging current of approx . 85 mA takes approx . 1 .5 hours .
5 ] [ 7 ] [ 3 ] [
with one hand . Hold the watch strap
3 ] [
and the watch strap
3 ] [
to a free USB port .
7 ] [
to the watch strap
7 ] [
5 ] [
apart at the p USB mark
5 ] [
7 ] [
.
5 ] [
correctly engage with the contacts
7 ] [
.
2 ] [
with the other hand .
.
4 ] [
from the USB port .
GB/IE/NI 13