Power-On Reset; Selecting Units Of Measure - Napa Carlyle DTW14FL Instruction Manual

POWER ON/RESET
• Press to power on the digital torque wrench.
• Pressing can also be used to reset the torque
wrench before use.
LOW BATTERY VOLTAGE PROTECTION
• If the battery voltage is below 2.3 volts, the wrench
will highlight the battery symbol and after a few
moments turn off.

SELECTING UNITS OF MEASURE

The torque wrench displays 4 different units of
measure:
1. Newton meters (N-m)
2. Inch Pounds (in-lb)
3. Foot Pounds (ft-lb)
4. Kilogram Centimeter (kg-cm)
Pressing the button allows you to cycle
sequentially through each of these units.
SETTING TORQUE VALUES
Torque Value
Use the Up arrow to increase torque value. Use the Down arrow to decrease torque value.
DTW14FL
NOTE:
If an external force is being applied to the torque
wrench during power-on/reset or wake up period, an
initial torque will be shown in the display. Some or all
the lights will illuminate and the wrench will sound a
continuous alarm tone.
To clear the display and stop the alarm press the
button.
In-lb
Increases
Torque Value
8
Battery Indicator
N-m
Ft-lb
Decreases
Torque Value
Kg-cm
Rev. 12/11/14