POWER UNIT INSTRUCTIONS
1. Place the handle on the release valve and
rotate clockwise until the valve is closed
(hand tighten only).
Note: When not in use, store power unit with the piston in the fully retracted position and the release valve closed.
NOTES
520-5000 & 520-5001 Operation Manual
2. Place the handle in the cradle.
Move handle up and down to
lower the carriage and apply force
to the item being pressed.
6
MODEL 520-5000 & 520-5001
SHOP PRESS ASSEMBLY INSTRUCTIONS
3. To release pressure, remove the handle from
the cradle and use the handle to slowly turn the
release valve counterclockwise. The power unit
cylinder will retract and the press cradle will return
to the stored position.
Rev: 02/15/07