Installing With Sco Openserver - Adaptec 44300 Installation And User Manual

Installing with SCO OpenServer

To install the driver on OpenServer:
Start your computer, then insert the driver disk.
1
Begin the driver package installer:
2
# pkgadd -d diskette1
OR
# pkgadd -d diskette1 adp94xx
At the installer prompt, type
3
Select 1 for the aacraid package.
4
When the installation is complete, select q to quit the installer.
5
Reboot your computer and remove the driver disk.
6
Continue with
Chapter 8: Installing the Driver on an Existing Operating System
.
go
Managing Your Storage Space on page 41.
40