Installing Or Updating Device Drivers After Installing Netware - Adaptec 1420SA Quick Installation Manual

Adaptec Serial ATA II RAID 1420SA Quick Installation Guide
4 On the Device Type screen, select Storage adapters, then press
Enter.
5 If the list contains the HostRAID SATA driver (
select the driver, then press the Delete key to delete it.
6 Press the Insert key twice to Add an unlisted driver.
7 Insert the support diskette for Novell NetWare.
8 Press F3 to specify a path then type a:\
drive letter), then press Enter.
Note: The driver and support files will be copied to the system
volume:
AAR81XX.HAM
9 Verify that the driver name displays in the list of device drivers
that appears in the window (for example,
select Return to Driver Summary then press Enter.
10 Select Continue, then press Enter.
11 Follow the instructions in the NetWare manual to complete the
installation.
Installing or Updating Device Drivers After
Installing NetWare
To update the driver in an existing NetWare 6.5 system see
Updating the Device
NetWare system, see
Updating the Device Drivers
1 Reboot your system to DOS.
2 At the prompt, copy the drivers (
to:
c:\NWSERVER\DRIVERS\XXXX
where XXXX is the name of the driver.
3 Restart your system.
14
.
Drivers. To install the driver in an existing
Installing the Device
AAR81XX.HAM
where a is the diskette
(
AAR81XX.HAM
Drivers.
,
AAR81XX.DDI AAR81XX.HAM
),
) then
)