Installing with SCO OpenServer
You will need the SCO OpenServer CD to complete this task. To install the driver when
installing OpenServer:
Insert the OpenServer Installation CD.
1
Restart your computer.
2
Follow the on-screen instructions to begin the OpenServer installation.
3
When prompted to load more HBA drivers, insert the driver disk, then select Yes. (To load
4
more HBA drivers, repeat this step.)
Insert the driver diskette, then press Enter twice to load the driver.
5
If you are installing other third-party devices, install them now. Otherwise, select No.
6
Complete the SCO OpenServer installation, following the instructions included with your
7
operating system.
Continue with
8
Chapter 7: Installing the Driver and an Operating System
Managing Your Storage Space on page
41.
36