Switching On The Cooktop; Setting The Power Level; Switching Off A Cooking Zone/The Cooktop; Residual Heat Indicator - Miele KM 7564 FR Operating And Installation Instructions


Risk of fire due to overheated
food.
Unattended food can overheat and
ignite.
Do not leave the cooktop unattended
whilst it is being used.
Please note that the heating-up time
on induction cooktops is much
shorter than on conventional
cooktops.

Switching on the cooktop

 Touch the  sensor.
Further sensor controls will light up.
If no further entry is made, the
cooktop will switch itself off after a
few seconds for safety reasons.

Setting the power level

Permanent pan recognition is
activated as standard (see
"Programming"). When the cooktop is
switched on and you place a pan on
one of the cooking zones, all the
sensors for that cooking zone's
numerical keybank will light up.
 Place a pan on the cooking zone you
want to use.
 Touch the sensor control for the
desired power level on the respective
numerical keybank.
Switching off a cooking zone/
the cooktop
 To switch off a cooking zone, touch
the 0 sensor for that cooking zone.
 To switch off the cooktop and all the
cooking zones, touch the  sensor.

Residual heat indicator

If a cooking zone is still hot, the residual
heat indicator will light up after the zone
has been switched off. Depending on
the temperature, a dot will appear
above power levels 1, 2 and 3.
The dots of the residual heat indicator
will go out one after another as the
cooking zone cools down. The last dot
only goes out when the cooking zone is
safe to touch.

Risk of burning on hot cooking
zones!
The cooking zones will be hot after
use.
Do not touch the cooking zones
while the residual heat indicators are
on.
Operation
41