Placement Of Unit; Lcd Display - activTek AP3000 II Owner's Manual

PLACEMENT OF UNIT

Place the unit as high as possible to ensure the best
purification. (On top of a bookshelf, high cabinet, etc.)
Suggested locations are listed in the order of preference:
1. Nearest the source of the worst pollution.
2. Near a cold-air return to thoroughly circulate the
benefits of your AP3000 II throughout the area.
3. In the area most heavily used to achieve maximum
benefit.
NOTE: The rear of the unit should always have at least
one inch of open area to allow unrestricted
airflow. Point the unit towards the center of the
room for maximum dispersion of ions. To prevent
injury, be sure the power cord is not accessible to
small children.

LCD DISPLAY

The LCD Screen is used to display all current settings (see below) as well as any maintenance
reminders.
LCD Screen Backlight
As adjustments are being made, the LCD screen backlight will brighten and the settings on
the screen will change. After 3 seconds without change, the backlight will return to normal. If a
maintenance reminder or a service reminder appears, the backlight will brighten and constantly
flash until the Reminder Reset button is pressed or the service problem is corrected.
Fan Speed
Reminders
(normally blank - reminders appear here when unit needs
maintenance)
Purifier Setting
5