Disabling Quickdraw Gx - Tektronix PHASER 240 User Manual

Disabling QuickDraw GX

You may want to disable QuickDraw GX when printing from some
non-QuickDraw GX applications so you can use the Phaser 240 printer
driver (based on the LaserWriter 7.1.2 driver) described in Chapter 2.
1.
Open the Extensions folder inside the System Folder.
2. Drag the QuickDraw GX extension onto the desktop.
3. Select Restart from the Special menu.
Any desktop printers created before you disabled QuickDraw GX will have
an "X" drawn through the icons. These desktop printers remain
unavailable for use until QuickDraw GX is re-enabled.
Using the Phaser 240 GX Driver
Printing Reference
A
A-21