Improving Print Speed - Tektronix PHASER 240 User Manual

Improving print speed

Note
There are different ways to improve print speed, such as by
upgrading to EtherTalk on a Macintosh, to Novell on a PC, or to
TCP/IP on a workstation. For more information, request a
document catalog from HAL or EuroHAL, the Tektronix
automated fax systems. Refer to page 8-2 for instructions on
using these systems.
If you tried to print a document with bitmapped images, but are dissatisfied
with the speed of the output, here are some suggestions.
All users
When you use any color correction option (other than None), your
printer can take longer to process bitmapped images. Select color
corrections from the Tektronix drivers or with downloadable
utility files; see page 6-5 for instructions.
The Standard option prints faster than the Enhanced and
High Resolution options. Select these print quality modes from
the Tektronix drivers or with downloadable utility files; see
page 5-8 for instructions.
The printer is shipped with 5 Mbytes of memory. Adding more
memory to your printer increases the data throughput from your
computer to the printer. See the Phaser 240 Color Printer User
Manual for details and ordering information.
Troubleshooting
Printing Reference
8
8-11