Using The; System Requirements - Tektronix PHASER 240 User Manual

Appendix
A

System requirements

Using the

Phaser 240 GX Driver
If you are using a Macintosh with QuickDraw GX and System Software 7.5,
use the Phaser 240 GX driver to print to your Phaser 240 printer.
The Phaser 240 GX driver works with QuickDraw GX applications
and with non-QuickDraw GX applications.
QuickDraw GX doesn't work with non-QuickDraw GX printer
drivers. If you want to print from non-QuickDraw GX
applications with the Tektronix Phaser 240 driver (based on the
LaserWriter 7.1.2. printer driver) described in Chapter 2, you must
disable QuickDraw GX; see page A-21 for instructions.
The Tektronix Phaser 240 GX printer driver requires the following hardware
and software:
An Apple Macintosh II computer, or later
At least 8 Mbytes of RAM
QuickDraw GX and System Software version 7.5
Printing Reference
A-1