Dual Band Selection; Wireless(2.4Ghz Or 5Ghz); Wireless Settings - TP-Link Archer C2 User Manual

Chapter 4
• WAN MAC Address
If your ISP requires you to register the MAC address, please enter the correct MAC
address in this field. Click
port to the factory default value.
• Your PC's MAC Address
managing the router. If the MAC address is required, you can click
and this MAC address will be filled in the
Note:
• You can only use the MAC Address Clone function for PCs on the LAN.
• If you have changed the WAN MAC address when the WAN connection is PPPoE, it will not take effect
until the connection is re-established.
4. 3.

Dual Band Selection

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Dual Band Selection.
3. Select the working radio band as needed and click Save.
4. 4.

Wireless(2.4GHz or 5GHz)

4. 4. 1.

Wireless Settings

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
- This field displays the current MAC address of the WAN port.
Restore Factory MAC
- This field displays the MAC address of the PC that is
to restore the MAC address of WAN
WAN MAC Address field.
Configure the Router
Clone MAC Address
23