Adjustment Of The Rowing Machine; Fill And Empty The Tank - CARDIOSTRONG Baltic Pro Assembly And Operating Instructions Manual

2.4

Adjustment of the rowing machine

2.4.1

Fill and empty the tank

⚠ CAUTION
+ The water inside the tank must not be drunk and must be disposed of after use.
࣑ ATTENTION
+ Fill the tank only with tap water. Do not use distilled water.
+ Do not fill the water tank above the maximum capacity, this may void the warranty. The
maximum filling quantity can be found in the section on the water level in this chapter.
+ To prevent algae formation, limescale and possible damage to the tank, we recommend the
use of chlorine tablets. Only use chlorine tablets for rowing machines.
1. Remove the fill plug (50) from the upper tank (24).
2. Filling: Place the funnel (96) in the tank opening and fill the tank using the pumping siphon (97)
or a measuring cup and a bucket (see figure A).
3. Emptying: Place a bucket next to the rowing machine and pump the water with the pumping
siphon (97) from the tank into the bucket (see fig. B).
4. After filling or emptying the tank, insert the fill plug (50) into the tank (24) and wipe off excess
water from the frame.
Water level
The water level indicator is located on the top of the tank (see Fig. A). The minimum level for filling
is 1, the maximum level 6.
The resistance is determined by the amount of water in the tank.
Example: level 2 for light resistance, level 6 for highest resistance.
17