Table of Contents
Advertisement
The following settings may be made:
LOF (Local oscillator frequency) is the frequency used by an LNB to convert the frequency
received into the so-called 1. Intermediate Frequency, which can then be interpreted by the
receiver. So-called Universal LNBs operate with 2 LOFs, in order to cover the entire recepti-
on range of from 10.7 to 11,8 GHz (low-band) and from 11,7 to 12,75 GHz (high band).
When this line is marked, use the numeric keys to enter the LOF frequency of the low band
of your LNB.
When this line is marked, use the
band of your LNB.
When this line is marked, use the
LNB switches over from low-band to high-band.
The following points of this menu should only be entered if you want to test the satellite sig-
nal by means of a self-configured satellite (User 1 to 14).
When this line is marked, use the
grammes are broadcast.
Use the
cal).
The symbol rate expresses the volume of data transmitted per second. This could be, for
instance, 27500 (27500 symbols per second). Use the
priate symbol rate.
Press the
key to display a window, in which you can use the
select the desired FEC rate (
If you do not know the FEC rate, select
Press the
key to accept this setting.
If you have entered the information relating to the test transponder correctly, this line will dis-
play the signal strength.
to enter the LOF frequency of the high
dto enter the frequency at which your
to enter a frequency on which digital pro-
to enter the desired polarisation plan (
,
,
,
,
in this line.
15
or
).
zontal or
to enter the appro-
to
i-
Advertisement
Table of Contents
