Table of Contents
Advertisement
>
Use the
>
Press the
7.7.1 All
When this search mode is activated, all satellites and transponders available in the system
will be scanned. At the end, new programmes will be displayed in yellow type in the pro-
gramme/channel list.
>
Use the
>
Confirm with the
The legend "
>
Press
again to start the search.
>
The search can be terminated at any time by pressing
It is quite likely that a full scan may take 15 minutes or longer.
Please note any notes and information displayed on the screen.
7.7.2 Satellite
This search mode can be used to search a specific satellite. All other satellites will be
ignored in this mode.
>
Use the
>
Confirm with the
The legend "
>
Before proceeding further, you will still have to select the satellite to be scanned.
Press the
A selection window will appear with the four available satellite positions.
>
Use the
>
Confirm with the
>
Use the
>
Press
again to start the search.
>
The search can be terminated at any time by pressing
It is quite likely that a full scan may take 15 minutes or longer.
Please note any notes and information displayed on the screen.
7.7.3 Transponder
This search mode can be used to search a specific transponder (see Point 9: Technical
Terms) for channels. In order to use this function, you will have to enter data relating to the
transponder.
>
Use the
>
Confirm with the
The menu
to select the search mode to be used.
key to display the relevant sub-menu.
keys to select the
key.
" will appear on the display.
keys to select the
key.
" will appear on the display.
key.
keys to select the satellite.
key.
keys to mark the entry
keys to select the
key.
option.
will be displayed.
36
.
.
option.
Advertisement
Table of Contents
