Alarm Input And Output Connection - HIKVISION PanoVu Series Quick Start Manual

1.2 Alarm Input and Output Connection


The network camera can be connected with alarm inputs (0~5VDC)

Refer to the following diagrams for alarm output:
DC Load
Dome
OUT(n)
Relay Output
OUT(n)
Diagram (left)
The alarm provides the relay output, and the external power supply is required when it connects to
the alarm device.

For DC power supply (left diagram), the input voltage must be no more than 30VDC, 1A.

For AC power supply, the external relay must be used (right diagram) to prevent damages to
the camera and avoid risk of electric shock.
PanoVu Series Camera·Quick Start Guide
Dome
+
DC -
Relay Output
Figure 1-2 Alarm Out Connections
GND OUT
30VDC
1A
OUT(n)
OUT(n)
Diagram(right)
7
JQC- 3FG
Relay
( 10 A 250VAC)
～220V AC
L N