Table of Contents
Advertisement
-
ISDN PRI or BRI cable, if applicable
-
FrameSaver SLV 9126/9128 Quick Reference (Document No. 9128-A2-LL10)
Before You Begin
Make sure you have:
-
A dedicated, grounded power outlet that is protected by a circuit breaker within
6 feet of the FrameSaver SLV (service level verifier) unit.
-
A clean, well-lit, and ventilated site that is free from environmental extremes.
-
One-to-two feet of clearance for cable connections.
-
An asynchronous terminal or PC (personal computer).
-
Configuration information for the FrameSaver unit being installed or replaced.
-
Appropriate cables:
— DSX cable
— Data port cables
— COM port-to-terminal or COM port-to-PC cable
— Modem cable
See the User's Guide for additional information on:
H
Troubleshooting
H
Cables, Connectors, and Pin Assignments
H
Technical Specifications
Cables You May Need to Order
If connecting to a . . .
T1 line interface/connector
(For use in Canada)
LAN
DSX-1 Cable
Contact your sales representative to order cables.
Order a . . .
T1 line interface cable,
RJ48C-to-CA81A
Customer converter with a DB25
plug on one end and an 8-pin
modular jack on the other end, with
a custom 8-conductor cable and
LAN adapter
DSX-1 Adapter Cable
RJ48C-to-DB15
2
Model/Feature
Number
3100-F1-510
3100-F2-910
9008-F1-560
Advertisement
Table of Contents
