Safety Instructions
Read the Important Safety Instructions and EMI Warnings beginning on page 19.
Installing the Power Supply and Cord
1. Insert the 4-prong plug into the POWER jack.
When inserting the plug at the rear of the FrameSaver unit, align the plug with the
notch above the POWER jack. Make sure the locking tab snaps securely into the
jack.
2.
Locking
Tab
3.
4. Plug the power cord into the grounded power outlet.
Verification Check:
-
Did any LEDs light?
– If yes, the FrameSaver unit has power.
– If no, refer to Troubleshooting in the User's Guide.
P
O
R
T
1
POWER
P
O
R
T
1
DSX
POWER
P
O
R
T
2
MODEM NET
DBM
COM
3
Insert the 3-prong plug
2.
into an ac outlet.
Power Cord /
Transformer
3.
The front panel
OK LED lights.
3-Prong
Grounded
AC Outlet
99-16629