Troubleshooting; Optional Accessories; Exploded Drawing And Spare Parts List - Mafell FM 1000 Translation Of The Original Operating Instructions

7

Troubleshooting

Some of the most frequent defects and their causes are listed in the following chart. In case of other defects,
contact your dealer or the MAFELL customer service.
Defect
Machine cannot be switched on
Machine stops while working
8

Optional accessories

- Collet Ø 3 mm
- Collet Ø 4 mm
- Collet Ø 6 mm
- Collet Ø 8 mm
- Collet Ø 1/8" (3.175 mm)
- Collet Ø 1/4" (6.35 mm)
- Collet Ø 3 mm + union nut
- Collet Ø 1/8" (3.175 mm) + union nut
- Union nut
- Reducing sleeve ø3 mm
- Reducing sleeve ø1/8"(3.175)
- Reducing sleeve ø4 mm
- Reducing sleeve ø6 mm
- Collet adapter incl. union nut
9

Exploded drawing and spare parts list

The corresponding information in respect of spare parts can be found on our homepage: www.mafell.com
Danger
Determining the causes for existing defects and eliminating these always
requires increased attention and caution. Pull the mains plug beforehand!
Cause
No mains voltage
Mains fuse defective
Carbon brushes worn
Mains failure
-27-
Elimination
Check power supply
Replace fuse
Take the machine to a MAFELL
customer service shop
Check mains back-up fuses
Order No. 093731
Order No. 093732
Order No. 093733
Order No. 093734
Order No. 093735
Order No. 093736
Order No. 093737
Order No. 093738
Order No. 093729
Order No. 207944
Order No. 207945
Order No. 207949
Order No. 207946
Order No. 207943