Page 1
070334.0723/l Fugenfräse Originalbetriebsanleitung Grooving Machine Translation of the original operating instructions Rainureuse Traduction de la notice d'emploi originale Fresa de junta Traducción del manual de instrucciones original WARNUNG Lesen Sie alle Sicherheitshinweise und Anweisungen. Versäumnisse bei der Einhaltung der Sicherheitshinweise und Anweisungen können elektrischen Schlag, Brand und/oder schwere Verletzungen verursachen.
English Table of Contents Signs and symbols ......................13 Product information ......................13 Manufacturer´s data ....................... 13 Machine identification ..................... 13 Technical data ........................ 14 Emissions ........................14 Scope of supply ......................14 Use according to intended purpose ................15 Residual risks .........................
Product information for machines with product no. 951101, 951120 or 951122 2.1 Manufacturer´s data MAFELL AG, Beffendorfer Straße 4, D-78727 Oberndorf / Neckar, Phone +49 (0)7423/812-0, Fax +49 (0)7423/812-218, e-mail: mafell@mafell.de 2.2 Machine identification All details required for machine identification are available on the attached rating plate.
The typical hand-arm vibration is less than 2.5 m/s 2.5 Scope of supply Grooving machine KFU 1000 E complete with: 1 TCT groove-cutting blade Ø 120 x 3.6 x 20 mm (423/32 x 1/8 in. x 20 mm), 12 teeth...
The grooving machine KFU 1000 E must be operated, relevant liability insurance tooled and maintained only by persons more than 18 association or equivalent, and the...
- Blunt cutting blades which impose an excessive load on the motor. 4.1 Mains connection Instructions as to the use of personal safety The gooving machine KFU 1000 E has Class II equipment protective insulation (double-insulated). - Always wear close-fitting industrial clothing and Before starting up, make sure that the mains voltage remove rings, bracelets and watches.
The required speed can be set by means of the setting wheel on the motor cover. The grooving machine KFU 1000 E is designedwith a low maintenace requirement. The ballbearing are 5.3 Cutting depth adjustment greased for life.
Ref. No. 091460 - Replacement knives for hand grooving tool, semi-circular Ref. No. 091467 Push handle long Ref. No. 202545 Exploded drawing and spare parts list The corresponding information in respect of spare parts can be found on our homepage: www.mafell.com -18-...
Page 12
For this purpose, the machine or the appliance is to be forwarded freight paid to our plant or to an authorized MAFELL repair service. Refrain from trying to carry out the repairs yourself as otherwise your warranty claim will become extinct. We do not accept any liability for any damage resulting from improper handling or normal wear.