THOMSON 510, 510i, 530 Setup And User Manual page 20

1 SpeedTouch™ Installation
16
Step
The Setup wizard should find your SpeedTouch™ device on the local network.
6
This is indicated by the following window:
In case more than one SpeedTouch™ device is found, a listing is provided from
which you can select your SpeedTouch™ from.
Note: If the Setup wizard does not find any SpeedTouch™ on the network an
error window pops up. In this case check:
•
Whether your PC is correctly connected to the SpeedTouch™
(Ethernet or USB).
•
In case of Ethernet connectivity, that no dedicated firewall device or
router is placed between your PC and the SpeedTouch™ and that no
personal firewall software is running on your PC.
•
Whether the SpeedTouch™ is turned on and fully initialized.
To repeat the search for the SpeedTouch™, click Back and proceed with step
5 of this procedure.
To continue with the configuration of your SpeedTouch™ and your PC,
7
proceed with the configuration procedure described below.
Action
3EC 37891 AAAA TCZZA Ed. 01