UNPACK THE OPERATOR
UNPACK THE OPERATOR
1. Open the box and remove the front cover, chain
cover, rear cover, edge sensor, photo eye, chain
hardware kit, and ship with kit.
2. Check the contents of the ship with kit:
a. Basic Manual
b. UL 325 required gate safety signs and zip ties
c. DASMA gate safety literature
d. Rear cover mounting hardware
e. Cover keys
f.
Chain cover lock pin
g. Optional 208/230VAC and 24VDC voltage
labels
3. Lift the chassis using the lift handles.
Chain Cover
Rear Cover
Lift Handle
Note: You can mark the slots and conduit area on
the plywood underneath the chassis and then
use the plywood as an anchor hole template.
12
www.hysecurity.com
GENERAL OPERATOR DIMENSIONS
(COVER WIDTH)
Front Cover
SLIDESMART CNX 15 BASIC MANUAL
24 1/2"
(62 cm)
(OPERATOR
HEIGHT)
L
15 3/8"
(38 cm)
(COVER DEPTH)
W
20 7/8"
(53 cm)
H
MX4779 REV. A
©2019