Advertisement
Delete transmitter
Using „Delete transmitter", the coding of your
transmitter buttons (A/B/C/D) can be selectively,
or completely deleted from the receiver.
Deleting individual transmission codes
R
>1,6
s
Delete all transmission codes (RESET)
R
>1,6
s
R
programming button R
Tx
transmitter button
General Information
Disposal
Waste electrical products not be disposed of
with household waste!
Dispose of the waste product via a col-
lection point for electronic scrap or via
your specialist dealer.
Put the packaging material into the
recycling bins for cardboard, paper and
plastics.
Press button
R
>1,6 s
Tx
<
1,6 s
Tx
<1,6 s
A/B/
C/D
R
>1,6 s
R
>1,6
s
R
>1,6 s
Warranty
Within the statutory warranty period we under-
take to rectify free of charge by repair or replace-
ment any product defects arising from material or
production faults.
Any unauthorized tampering with, or modifications
to, the product shall render this warranty null and
void.
Display LED RCL07
LED R flashes rapidly
LED R illuminates for
approx. 4 s
LED R flashes rapidly
LED R illuminates for
approx. 4 s
Remark
The receiver is in delete mode for 30 s. Delete
the required transmission code during this
period, after the period has expired, the receiver
changes to operation mode.
Press the transmitter button to delete. The
transmission code is deleted and the receiver
changes to operation mode.
The receiver is in delete mode for approx.
30 s. Again press the button R during this
period, after the period has expired, the receiver
changes to ready for operation.
All transmission codes have been deleted and
the receiver changes to ready for operation.
Conformity
Hereby, ELDAT GmbH declares that the
radio equipment type RCL07 is in compliance
with Directive 2014/53/EU.
The full text of the EU declaration of conform-
ity is available at the following internet address:
www.eldat.de
3
Advertisement
