Pentair LINEGUARD UF-100 Manual page 15

9 tEcHNIcAL INFoRMAtIoN
Dimensions
Height: 1156 mm / 45,5 inch
width: 315 mm / 12,5 inch
Depth: 210 mm / 8,3 inch
clearance
Bottom: 600 mm / 2 ft
sides: 10 mm / ½ inch
top: 100 mm / 4 inch
weight
complete: 38 kg / 84 lbs
without modules: 26 kg / 57 lbs
Electrical specifications
Control unit voltage: 90 - 264 VAC / 50 – 60 Hz
power usage: 40 w max
compliance: cE, UL 429/1310
operating conditions
Maximum operating pressure: 4 bar / 58 psi
Minimum operating temperature: +1 °c / 34 °F
Maximum operating temperature: 50 °c /122 °F
Minimum storage temperature: +1 °c /34 °F
Maximum storage temperature: 60 °c /140 °F
safety
A daily flush cycle is preset at one flush of 30 seconds at 1:00 am. Alarm warnings are preset for one year after
the service date or when 999 m (264,000 gal) of water is filtered or whenever a minimum flux of 0 l/(m
3
reached. A backpressure valve should be installed to prevent backward contamination of the water supply.
2 4
EN
10 LIMItAtIoN oF wARRANty AND LIAbILIty
X-Flow B.V. represents and warrants for the warranty period of one year that its products are free from
substantial defects in materials and workmanship and conform to the specifications. X-Flow's warranties do
not cover defects or deficiencies due to or arising from (1) normal wear and tear or improper, abnormal, or
negligent handling, operation, maintenance, overloading, or use; (2) tampering, alteration, or repair by buyer
or third parties without the prior written consent of X-Flow.
the warranties specifically contained in this section are the only warranties provided and are expressly in
lieu of all other warranties, express or implied, including – without limiting the generality of the foregoing -
implied warranties of merchantability and fitness for a particular purpose, which are hereby disclaimed. In
no event shall X-Flow or its Affiliates be liable for any indirect damages.
X-Flow will repair or replace products that are not in conformity with the warranties as described above. Any
complaints about defects in or non-conformity of the products must be submitted by the buyer to X-Flow in
writing - specifying the defect or non-conformity in reasonable detail - within ten (10) business days of having
received the relevant goods, failing which the right to complain shall lapse, except in respect of defects that
the buyer could not reasonably have discovered within this time frame.
the information and data contained in this document are based on our general experience and are believed
to be correct. they are given in good faith and are intended to provide a guideline for the selection and use
of our products. since the conditions under which our products may be used are beyond our control, this
information does not imply any guarantee of final product performance and we cannot accept any liability
with respect to the use of our products.
the quality of our products is guaranteed under our conditions of sale. Existing industrial property rights
must be observed.
.h) is
2
2 5
EN