Sharp PN-Q601 Operation Manual page 43

>>
On-Screen Display Menu
<<
Example
System Options (Continue)
PUBLIC MODE
10. INPUT MODE START
Selection Selection between "Normal","COMPONENT", "VIDEO", "PC", "HDMI 1/2/3"
Default Normal
Explaination In power-ON, the input source to be started or channel can be set.
(In standard mode, the operation follows the last memory.)
About options
All the input sources in the model are made selectable.
Limit in Setting The display of channel setting menu and the channel setting operation are prohibited.
Exception
In setting at "Normal", the setting of "Input mode fixed" is changed to "Variable" and selection should be
Remarks
prohibited.
11. INPUT MODE FIXED
Selection Selection between "Variable", "Fixed", "ACON (AC CTRL)" and "AC/RCON (AC/RC CTRL)"
Default - (Variable)
Explaination At the "Fixed"setting, the Monitor set gets started with the settings of "Input mode start", and then any other
channels and inputs are not accepted.
At the "ACON (AC CTRL)"setting, the Monitor set gets started with the settings of "Input mode start" under AC
control.
At the "AC/RCON (AC/RC CTRL)" setting, the Monitor set gets started with the settings of "Input mode start"
under either control.
Limit in Setting The following keys are invalidated.
input However, the keys (input switching and CH
Exception None
In the following case, setting is cancelled and mode is changed to "Variable".
Remarks
When the setting of "Input mode start" is set to "Normal".
12. LOUD SPEAKER (ON/OFF)
Selection Selection between "ON" and "OFF"
Default ON
Explaination If "OFF" is selected, Monitor stops Speaker output.
Limit in Setting None
Exception None
Press the volume UP/DOWN key, and the mute icon appears for 4 seconds.
Remarks The mute key and audio-related keys are displayed with caution.
Usually, the audio output can be adjustable.
ENG 4-27
/ keys) of the unit for menu operation remain valid.