Table of Contents
Advertisement
>>
On-Screen Display Menu
<<
Example
Information (Continue)
Software Update
Manual Update
CAUTION
Do not remove the USB memory device or unplug the
AC cord while the software is being updated.
Be sure to properly follow the whole procedure
described below, step by step. Otherwise, for
example, the Monitor cannot read the data in the USB
memory device and software updating will fail.
1 Insert the USB memory device with the update file into the
USB terminal on the Monitor.
ENG 4-9
2 Press /
on the Manual Update screen to select "USB
Update", and then press ENTER.
3 Press ENTER to start checking the data in the USB
memory device.
4 During the data checking, "Checking" blinks.
The current version of the Monitor software and the
version of the update file on the USB memory device
are displayed.
If the USB memory device is not properly installed or the
correct update file cannot be found on the USB memory
device, an error message is displayed.
Check the file on the USB memory device, and then
reinsert the USB memory device correctly.
Hide quick links:
Advertisement
Table of Contents
