Overview; General; Delivery Contents; Power Supply - Siemens SIMATIC RTLS Series Device Manual

1 Overview

1.1 General

The gateway SIMATIC RTLS4030G represents, like the SIMATIC RTLS4030A, a basing point
for the localization within the Wireless Location System (WLS). The gateway can be connected
to the local IT-infrastructure via Ethernet. Through this connection the nodes (anchors and
gateways) will exchange the localization data gathered as well as customer specific data
between the localization network and the localization server. It is suggested to deploy several
gateways for larger localization networks in order to raise the number of locatable transponders
and to enhance the availability of the position information.

1.2 Delivery contents

1 SIMATIC RTLS4030G (article number 6GT2701-5DB03)
Accessories (not included in scope of delivery)
1 power cable (Bulgin 400 Series Buccaneer® PX0410/03S),
•
3-pin, 5 m (article number 6GT2791-2AH50)
Bayonet connector (Amphenol RCP-00BMMS-TLM7001) made of plastic for RJ45 connector for
•
cable mounting (IP65) at gateway (article number 6GT2790-0CB00)
Holder for ceiling suspension of anchor/gateway (article number 6GT2790-0BE20)
•
Holder for corner/mast mounting of anchor/gateway (article number 6GT2790-0BE30)
•

1.3 Power supply

The device can be operated with 8 to 30 V direct current (DC) voltage.
The power supply for the device should not exceed the following values:
U < 30 V; I < 3.3A; P < 100 W
The device can be supplied via power connector or Ethernet (PoE), not both at the same time.
The device is a class 0 PoE-Device.

1.4 Application field

The device has been designed for operation in humid environments. For that reason it is
absolutely necessary that all connections are made using waterproof plugs according to the
technical specifications described below and to prevent the ingression of moisture into the
device by using the appropriate sealing caps.
6
CAUTION
Device manual, 10/2018, C79000-G8976-C515-01
SIMATIC RTLS4030G