Table of Contents
Advertisement
Safety Information
Instrument Markings and Symbols
12
Connect and Disconnect Properly. Connect the probe to the
WARNING
oscilloscope and connect the ground lead to earth ground before
connecting the probe to the circuit under test. Disconnect the
probe input and the probe ground lead from the circuit under test
before disconnecting the probe from the oscilloscope.
Inspect the probe regularly to check for any damage. Do Not
CAUTION
Operate With Suspected Failures. If you suspect there is damage to
this probe, have it inspected by a qualified service personnel.
The product is marked with this symbol when it is necessary for the user to refer
to the instructions in the documentation.
N2862B, N2963B, N2889A, and N2890A User's Guide
Advertisement
Table of Contents
