Joovy Carboose S Instruction Manual page 36

Car Seat Adapter (Maxi-Cosi/Cybex/Nuna) (Optional)
• To use the car seat adapter in the front position, first ensure the front seat is removed.
• Line up the male brackets on the bottom of the car seat adapter with the female brackets on the
stroller frame. (102) Make sure the arrow mark on the adapter faces backward.
• Push down on each side of the car seat adapter until both brackets click into place. (103) Pull up
the car seat adapter on both sides to ensure it is secured.
• The car seat can only face backward.
• Hold the car seat by the carry handle and lower the car seat onto the stroller so that the bracket on
car seat latches onto the car seat adapter. Pull up on car seat to ensure it is secure.
• To remove the car seat, press the release buttons on each side of the car seat and lift up.
• To remove the adapters from the stroller, press each side trigger and pull it up off the stroller. (104)
• To use the car seat adapter in the rear position, ensure the front seat is fully upright.
• Line up the male brackets on the bottom of the car seat adapter with the female brackets on the
stroller frame. (105) Make sure the arrow mark on the adapter faces backward.
• Push down on each side of the infant car seat adapter until both brackets click into place. (106)
Pull up on the infant car seat adapter on both sides to ensure it is secured.
• The car seat can only face backward.
• Hold the car seat by the carry handle and lower the car seat onto the stroller so that the hook on
the rear of the car seat latches onto the car seat adapter. Pull up on car seat to ensure it is secure.
• To remove the car seat, press the release buttons on each side of the car seat and lift up. (107)
• To remove the adapter from the stroller, press the trigger on adapter and pull it up off the stroller.
NOTE: The stroller can be folded with the infant car seat adapters when it's installed in the front or
rear position.
I WARNING:
stroller. ALWAYS install the infant car seat so that the child is facing toward
the rear (handlebar) of the stroller. ALWAYS position the infant car seat so
that it securely snaps into the infant car seat adapters. The infant car seat
adapter is for use ONLY with specific infant car seats. DO NOT use other
infant car seat models that are not in the Car Seat Compatibility List (see
below). This product is not a toy. DO NOT allow children to play with it.
When using your stroller with an infant car seat, the following are the compatible infant car seat
Graco® SnugRide Click Connect 30
Graco® SnugRide Click Connect 35
Graco® SnugRide Click Connect 35 LX
Graco® SnugRide SnugLock 35 DLX
Graco® SnugRide Click Connect 40
Chicco® KeyFit
Chicco® KeyFit 30
Chicco® KeyFit 30 Magic
Chicco® KeyFit 30 Zip
Chicco® KeyFit 30 Zip Air
Chicco® Fit2 2-Year
Britax®/BOB® B-Safe
Britax® B-Safe 35
Britax® B-Safe 35 Elite
36
For use ONLY on the Joovy Caboose S™
IMPORTANT NOTE
models that the Caboose S will accommodate:
For the most updated list of compatible infant car seats,
please check our website at www.joovy.com.
Cybex® Aton 2
Cybex® Aton Q
Cybex® Cloud Q
Maxi-Cosi® Mico
Maxi-Cosi® Mico 30
Maxi-Cosi® Mico Max 30
Maxi-Cosi® Mico AP
Maxi-Cosi® Mico NXT
Maxi-Cosi® Pebble
Nuna® Pipa