Joovy Carboose S Instruction Manual page 16

Adjusting the Seat
• The front seat has 3 recline positions.
• To adjust, pull up on the recline mechanism on
the top of the seatback and pull the seat to the
desired position. (29) Ensure that the recline
mechanism has engaged.
• For a more upright seat position, push the
backrest forward.
I WARNING:
make certain that the recline
mechanism is engaged in the same
position before placing the child
in the seat, whether the seat is upright or reclined. Push down on the
backrest to be sure it is secure.
Installing/Removing the Front Seat
• Line up the male brackets and insert them into the female brackets on the stroller frame bottom.
(30)
• Push the seat downward into the position.
• Thread the supporting fabric strap into the slot of the seat back base. (31)
• Pull the supporting fabric strap downward tightly (32) and attach the strap onto the knob on
bottom of the seat frame. (33) Repeat for other side.
• Thread the crotch strap through the slot of the seat base. (34)
• Attach the Velcro® on both sides of the seat. (35)
• Attach the elastic loops underneath both sides of the seat base. (36)
• Attach the bottom panel of the seat fabric underneath the front of the seat base. (37)
NOTE: Removing the front seat is required for installing the car seat or bassinet in front
position.
• Detach the bottom panel of the seat fabric underneath the front of the seat base.
• Detach the elastic loops underneath both sides of seat base.
• Detach the Velcro® from both sides of the seat.
• Thread the crotch strap through the slot of the seat base. (38)
• Detach the two supporting straps at the bottom of the seat back from the nubs on the backrest.
(39)
• Push the lever inward on each side of the seat. (40)
• Pull the backrest with the fabric from the stroller. (41)
16
29
ALWAYS