Joovy Carboose S Instruction Manual page 12

Installing/Removing the Bench Seat
• The bench seat should be installed in the back of the stroller.
• Locate the arrows on top of the bench seat.
• Place the bench seat on the horizontal rails with the arrows facing forward. (15)
• Slide the seat backward to the end of the rails.
• Push down the bench seat onto the stroller frame.
• To lock the seat, pull the plastic clamps upward from EACH side of the bench seat and press up.
(16) Ensure the seat is secured.
• Unzip the zipper on the front seat back.
• Take out the waist strap from the pocket on the seat back. (17)
• Buckle the waist and crotch strap harness when using the stroller. (18)
• To unlatch the buckle, press the center button and remove both harness clips. (19)
• Store the waist strap in the pocket of the front seat back when not in use.
• To remove, release the clamps on each side of the bench seat and pull the bench from the stroller.
(20)
12