Kenmore 911.41779790 Owner's Manual page 18

OPERATION
Setting Special Features
Your control will allow you to lock the
touch pads so they cannot be activa.ted
when pressed. If you're worried about
leaving the oven unsupervised, activate
this feature.
1. Press and hold, at the same
time, the BAKE and BROIL pads
for 3 seconds, until the display
shows SF.
2. (a) Press the CLEAN pad. The
display shows LOC OFF (lockout
off).
(b) Press the CLEAN pad again.
The display will show LOC ON ' ::
(lockout on).
3, Press the START pad.
This feature can only be set
when the oven is not in use_ r
When this feature is on, the display will
show LOC, if a touch pad is pressed.
(This feature will not affect the clock,
timer, or oven light pads.)
This feature will automatically convert
the temperature you set for traditional
baking to convection cooking.
1, Press and hold the CONVECTION
BAKE pad for 4 to 5 seconds.
2. Press the TEMP UP or DOWN
ARROW pads to set the
temperature.
3. Press the START pad. You will see
the converted temperature in the
display. For example, if you entered
375° the display will show 350°. This
conversion will need to be set each
time you use Convection Bake.
Your new control has a cook and hold
feature for timed cooking only that Will: _
keep hot cooked foods warm up to 3
hours after the timed cooking is
finished. To activate this feature:
1. Press and hold, at the same
time, the BAKE and BROIL pads
for 3 seconds, until the display
shows SF. -
2. [a) Press the OVEN COOKING "
TIME pad. The display will show:
HLd OFF.
[b) Press the OVEN COOKING
TIME pad again toactivate the
feature. The display will show HLd
ON.
3. Press the START pad.
This special feature will a![0w you to •
change the speed; #1 means speed :of
change is slow Up to #5 which means
speed of change is fast. To set the :
speed you prefer, follow these stepS::
1. Press and hold, at the same ! _i
time, the BAKE and BROIL pads
for3 seconds, until the display
: Shows SF. ' ...... '::
2. Press the UP arrow pad. The ,,:.:
display will show the current set ....
speed ....
3. Press the UP arrow to increase the "
speed up to the number 5. :,
or
Press the DOWN arrow pad tO :
decrease the speed down to the: : :,
number 1..
4. Press the START pad.
18