Parameters Setting - Baxi Luna 3 Avant Series Instructions For The User And The Installer

To set the boiler parameters press the R and -
the display shows "F01" alternated with the value of the parameter.

Parameters setting

• Press +/- buttons for scrolling parameters;
• Press +/- buttons to change the single parameter value;
• Press the P button to save changes, the display shows
"MEM";
• Press the button to leave the function without saving, the
display shows "ESC";
Description of parameter
Type of gas boiler
F01
10 = sealed chamber
Type of gas
F02
00 = natural (metane) - 01 = LPG
Hydraulic system
F03
00 = instantaneous appliance
Programmable relay 1 setting
F04
2 = zone system (See SERVICE Instructions)
Programmable relay 2 setting
F05 13 = "cool" function for external air-conditioning
system (See SERVICE Instructions)
External sensor programmable input setting
F06
(See SERVICE Instructions)
F07...F12 Manufacturer information
F13 CH max. heating output
F14 D.H.W. max. heating output (0-100%)
F15 CH min. heating output
Maximum temperature setpoint setting
F16
00 = 85°C - 01 = 45°C
Pump overrun time
F17
(01-240 minutes)
Minimum burner pause
F18
in central heating mode - 00=10 seconds
F19 Manufacturer information
F20 Manufacturer information
F21...F22 Manufacturer information
F23 Maximum D.H.W. setpoint
F24 Manufacturer information
F25 Lack of water safety device
F26...F29
Manufacturer information (read-only parameters)
F30
Manufacturer information
F31 Manufacturer information
F34...F41 Diagnostics (See SERVICE Instructions)
Calibration function activation (See SERVICE
Final parameter
Instructions)
WARNING: do not modify the values of the "Manufacturer information" parameters.
BAXI - 925.200.1
925.492.2
20. PARAMETERS SETTING
buttons together for at least 6 seconds. When the function is activated,
(0-100%)
(0-100%)
19
Default value
10
00 01
O
00
02
04
00
00
100
100
00
00
03
03
07
--
00
60
35
00
--
10
30
--
00
INSTRUCTIONS PERTAINING TO THE INSTALLER
GB
HU
CZ