Baxi Luna 3 Avant Series Instructions For The User And The Installer page 16

GB
C2) Adjustment to reduced heat output
• disconnect the modulator feeding cable and unscrew the (b) Fig. 12 screw to reach the pressure setting corresponding
to reduced heat output (see table 1);
HU
• connect the cable again;
• fi t the modulator cover and seal.
CZ
C3) Final checks
• apply the additional dataplate, specifying the type of gas and settings applied.
Figure 12
Table of burner pressures - heat output - burner injectors
Gas used
Burner pressure (mbar*)
MINIMUM HEAT OUTPUT
Burner pressure (mbar*)
MAXIMUM HEAT OUTPUT
Injector diameter (mm)
no. of injectors
Table 1
Consumption table
Consumption 15 °C - 1013 mbar
Maximum heat output
Minimum heat output
p.c.i.
Table 2
925.492.2 BAXI - 925.200.1
Honeywell gas valve
240 Fi
G20
2,0
10,2
1,18
240 Fi
G20
2,62 m 3 /h 1,92 Kg/h
1,12 m 3 /h 0,92 Kg/h
34,02 MJ/m 3 46,30 MJ/Kg
a
b
310 Fi
G31 G20
4,4 12,1
21,8 2,1
0,77 1,25
15
310 Fi
G31 G20
3,22 m 3 /h
1,26 m 3 /h
34,02 MJ/m 3 46,30 MJ/Kg
INSTRUCTIONS PERTAINING TO THE INSTALLER
16
Sit gas valve
G31
32,3
5,2
0,77
G31
2,37 Kg/h
0,48 Kg/h