Simple Counting; Accumulation, Accumulation Display And Accumulation Clearing - Jadever JWL Series Manual

over or equal 20d, the HI lamp will light up.

7-4 Simple Counting

UNIT
1. Press key
G/N,
2. Press key
+/PRINT/HI
3. Use key
are10、20、50、100、200、500、1000( pieces)
4. Put the corresponding samples on the weighing pan, and then press key
is displayed momentarily before the display reverts to the sample quantity.
" "
→
5. Remove the samples and put the load on, the scale calculates the amount of the load.
6. To go back to the normal weighing mode, remove the load and press key
proper weighing unit.
Note:
1. The larger the sample size, the more accurate unit weight.
2. Symbol " " points at "UW" when calculated unit weight is lower than 4 / 5 of scale division.
7-5 Accumulation, Accumulation Display and Accumulation clear
Accumulation
Under the weighing mode, put the item on the weighing pan. Press key
appearance of
"
the item.
Remove the item and the display goes back to zero before the next accumulation can register. （The
maximum is 99 pieces, display the latest 10 accumulation events in details ）
Accumulation Display
M-/SET
Press key
to select the unit "PCS".
the ex-factory default sample quantity (10 pcs) is displayed.
HOLD/LO/-
or
is displayed momentarily before the display reverts to the weight of
". "
"
to display the accumulation data
(II)
to choose the sampling amount. Available options
.
JWL
TARE/
.
UNIT
to select the
M+/SAVE
at the
12