Table of Contents
Advertisement
Turning on the system
1.
Connect the power adapter cable to the DC jack / Phoenix connector (DC IN) of
QDSP-400 Series
2.
Connect the power cable to the power adapter
3.
Connect the power cable to a power outlet
4.
Press the power switch on the front panel to turn on the system
QDSP-400 Series User's Manual
DC Jack / 2-pin Phoenix Connector
Figure 7 Turning on the system
Chapter 2
On / Off
Advertisement
Table of Contents
Need help?
Do you have a question about the QDSP-400 Series and is the answer not in the manual?
Questions and answers