JEI MAGBEAST HM140T Safety Instructions And Operator's Manual page 3

Remove the unit from its case along with the accessories included:
The box should contain, where appropriate:-
• HM140T Drilling Machine
• Oil Bottle
• Operating Instructions
Accessory pack containing:-
• Chain and Carabina Book
• Allen key and jib strip adjustment
• Allen key for arbour
• Drill drift
• Chuck & Key (Optional extra)
Please check that the unit is the correct voltage, see plate on motor unit.
Fit the correct power plug for the supply outlet.
Connect the wire coloured green & yellow to the terminal marled 'E' or 'I' or coloured green/yellow
Connect the wire coloured blue to the terminal marked 'N' or the coloured black.
Connect the wire coloured brown to the terminal marked 'L' or coloured red.
WARNING – THIS MACHINE MUST BE EARTHED
Please follow these simple instructions for your own protection:
1. Check cable and plug for any damage
2. Never use blunt cutters (send your cutters back to JEI for resharpening)
3. Always wear safety goggles and gloves
4. Secure the unit with the safety chain when working overhead or vertical.
5. Always disconnect from the power source before changing cutters or working on machines
itself.
6. Remove rings, watches, ties etc that could tangle in the moving machine parts
7. Keep the unit and the workplace as clear of dirt and swarf as possible – check out JEI
Magbrushes for quick and effective collection of swarf.
8. Do not attempt to change speed or reverse while the drill is operating and running.
9. Regular maintenance is essential, check nuts, screws and bolts for tightness.
10. Always use the safety guard where appropriate
IMPORTANT: THESE INSTRUCTIONS ARE FOR YOUR OWN SAFETY.
3 | P a g e
SAFETY INSTRUCTIONS