Disassembling The H5I Humidifier - ResMed S9 Series Quick Start Manual

S9 VPAP Tx Lab System |

Disassembling the H5i Humidifier

Slide the latch.
1
Lift open the flip lid.
2
Remove the water tub.
3
Discard any excess water from the water tub.
4
Unclip all four side latches.
5
Pull apart the tub lid, plate and base.
6
Remove the maximum water level mark from the plate by pinching and pushing out the locks.
7
Locate the air outlet on the back of your H5i.
8
Remove the outlet clip by pulling apart the clip ends and sliding it off.
9
Remove the air outlet by pushing it through to the inside of the H5i.
10
1
5
9
6
Quick Start Guide
2
6
10
3
7
Lab Support 24-7
4
8
(888) 288-6738